To get an offer
 

To get the final price
 

Automechanical Plant LLC took part in one of the largest International Commercial Vehicles Exhibition COMTRANS 2013 held on September 10-14th 2013 at the International Exhibition Center Crocus Expo.

The total area of the Motor Show COMTRANS/13 has risen by more than 40% in comparison with 2011 and amounts up to 70.000 square meters. The quantity of the participants – 447 companies. The show has been visited by 25 280 specialists of the transportation market sector.

During the exhibition the representatives of the Russian and European Mass Media had a chance to get to know the recent developments of 2013 and to interview companies-participants.

Automechanical Plant LLC has participated together with Nizhegorodsky Automechanical Plant LLC at a combined stand exposing the following commercial vehicles:

— a three-way loading tipper with a crane on Mitsubishi Fuso chassis,

The tipper equipped with a crane is designed for loading/unloading and transportation of packaged cargo, single-piece and bulk building materials. A dumping platform of 6.85 m3 volume and 3540 kg loading capacity may rise up to 45 ° to the left and to the right and 25 ° backwards. The 5200-mm-long platform is spacious enough to carry standard timber, an installed cable crane, UNIC 374, with 3 ton capacity at an outreach of 2.7m may load heavy cargoes. The crane may be also applied while installing or removing wells for the hook may go down below the ground level.

— Aerial articulated working platform PNT230 on Isuzu 4JJ1 chassis,

Aerial articulated working platform PNT230 on Isuzu is designed to perform work at heights up to 22 m. One of the principal advantages of the articulated aerial work platforms is their compactness and maneuverability due to the Z-boom configuration that provides parallel movement of the boom relatively the building or any other object and allows you to use the vehicle in narrow spaces. The working platform is designed to lift two people and is equipped with a remote control and 220V socket for connecting the instrument. The platform is made of high-tensile fiberglass which provides electrical insulation up to 1000 V, as well as durability and simplicity in use. Wiring and hoses are routed inside the boom.

— Shift bus on Iveco Eurocargo chassis:

The vehicle body is made utilizing the so-called frameless technology, with the interior and exterior cladded. The window openings are fitted with single-chamber glazing. There are 22 passenger seats with three-point seat belts installed in the passenger compartment. The kitting up also comprises a heater, an air conditioner, a luggage rack, a folding table and a driver intercom system.

The products of “Automechanical Plant LLC” were also exhibited at partner stands:

— TFK KAMAZ (KAMAZ 43118 with a PTJ35SL)

  • Mitsubishi Fuso equipped with a hooklift,
  • Mercedes-Benz (a van and a recovery truck)
  • Volvo Trucks (van and a recovery truck).